Pergolas Pros in Phoenix

I'm looking to replace the top of an old school desk. Essentially it is a 600mm (w) x 500mm (d) top with a small shelf at the back (80mm (h) x 600mm (w) x 120mm (d)) - both sides of the top shelf should have a 100mm diameter holes cut in to function as cup holders. The wood should be stained using a dark oak stain. Lastly, the front of the desktop should have a rounded edge. Below is a sample of the desk top I'm looking for. The frame I have is different - the top sits on too of it and there's no part of the frame that goes beyond the top. Ideally I'd want to give some support to the shelves. Is this something you can do?

Material already purchased and designs already done by a carpenter however due to personal issues, he is only able to start in December but the work is required to be done as soon as possible.

Good morning, we need to build a sturdy wooden structure (wendy house).

We would like to remove current awning thing and replace with something similar yet modetn, open to ideas and suggestion. This is for the front of the house

Closed backside, front door and roof,is only whats required on the build. Got to buildings that will complete the side walls. +- 2x2m to +-2x4m

I want to install built-in cupboards: • high gloss and Quality durable woodgrain • sliding 1 mirror door 2 normal doors • 1 side 5 shelves and 1 top shelve for bedding • Ample storage space with aluminium hanging rails for larger items • side set of shelves for extra storage.

Rehang closet door - Cabinet door hinge stripped out of cabinet and door itself and requires to be refitted. Screws, hinges, and door is still available. I need this to be done on 15th July, Saturday @ 09h00.

Kindly quote me on cupboard doors for the attached picture. I’d like this area under the sink to be neatly covered with cupboard doors, please note I do not need shelving on the inside, only cupboard doors on the outside. I have sent out a RFQ for the cupboards and shelving, but I need a quote for the cupboard doors ONLY. Kindly quote me on this as this is a matter of urgency. The measurements are as follows: • L – 290 cm • B – 92 cm • W – 55 cm

Hi There Hope this finds you well.  I currently sell my own design style food serving tray online and am looking for someone to make up a new batch for me.  We have at least 15 confirmed orders and a request for some half size trays.  I wanted to ask if you would be interested in quoting on the project.  We do require a polished/sprayed finish and would prefer to use supawood.  It is quite urgent that we make a decision soon and would like a sample first.  Looking forward to hearing from you.  Jaclyn

I have a bed base with a wooden frame. One of the planks running across the bed base is cracked resulting in the bed squeaking. Please assist me in fixing the bed frame

I'm looking to replace the top of an old school desk. Essentially it is a 600mm (w) x 500mm (d) top with a small shelf at the back (80mm (h) x 600mm (w) x 120mm (d)) - both sides of the top shelf should have a 100mm diameter holes cut in to function as cup holders. The wood should be stained using a dark oak stain. Lastly, the front of the desktop should have a rounded edge. Below is a sample of the desk top I'm looking for. The frame I have is different - the top sits on too of it and there's no part of the frame that goes beyond the top. Ideally I'd want to give some support to the shelves. Is this something you can do?

Material already purchased and designs already done by a carpenter however due to personal issues, he is only able to start in December but the work is required to be done as soon as possible.

Good morning, we need to build a sturdy wooden structure (wendy house).