I have an existing camera system that i need to repair and connect to my phone

I have what appears to be a faulty door sensor that I need repaired. If possible, I need to have the mic on my gate intercom sorted out too. It is a G-speak that I can only hear static when someone calls from the intercom. I suspect the wiring into the gate motor is less than optimal and it is causing interference as a result.

6 devices installation in Pretoria. a) Have capacity to register up to 200 employees. b) Primarily make use of facial recognition to grant access. c) Should allow for the use of Biometric fingerprint recognition that can be programmed as a backup to facial recognition d) Authenticate the identity of the employees programmed and keep record of time and attendance. e) Link to a time and attendance system that can pull accurate access control reports with date and time flagged. f) Be able to communicate with via TCP/IP or wireless broadband network as a back up g) The service provider will be expected to configure the 10 devices making use of the company sim cards to serve as a back up to TCP/IP h) Devices should be able to retain access records in the absence of a network connection and update to the network when available i) Have 12month manufacturer warranty 3. Service provider must supply a software that: a) can synchronize to all 10 biometric devices into one reporting platform b) Can be installed on the company server and be accessed from a client PCs c) Client software should allow for registration of 3 users to access the platform d) Should have the capability to automate reports and have them emailed e) Is able to calculate working hours and provide a report in this regard 3 f) Allows for manual editing on the system reports by system administrators g) Has the potential to be modified in future to include remote time and attendance recording for people working from a remote location. 4. The service provider should provide device maintenance and software support for a period of 6 months. 5. The service provider should assist with user enrollments which can take up to 5 working days. 6. The service provider should provide: a) Software training for the software on client PCs and operating the devices installed. b) Training on enrolling and granting access to employees. c) An electronic training manual. Below are required: State Security Agency of South Africa certificate. Provide proof of similar work done in the Past with 2 signed reference letters with contactable references.

I currently have beams on my perimeter. its been in service for years. might need to be replaced.

Just wish to replace siren with indoor noise indicator for electric fence and to have current installed outdoor beams programmed to activate separately to indoor sensors

I need someone who Has a deep knowledge of DCS alarm. I want to replace beams. I have already bought the beams and also I have replaced 4. I want them connected and replaced the remaining ones

low battery faults need to be cleared and zones need to be named on a dsc alarm system

I require the installation of the Olarm module onto a Paradox System. I already have the Olarm module

I have beams installed already, need to have control panel replaced, also need touch pad replaced, and 5 passives and door contacts fitted. I have all of the equipment, just need installation.

Basic, cost effective system that can be linked to arm response . 5 wireless passives and 1 keypad to be installed .

I have an existing camera system that i need to repair and connect to my phone

I have what appears to be a faulty door sensor that I need repaired. If possible, I need to have the mic on my gate intercom sorted out too. It is a G-speak that I can only hear static when someone calls from the intercom. I suspect the wiring into the gate motor is less than optimal and it is causing interference as a result.

6 devices installation in Pretoria. a) Have capacity to register up to 200 employees. b) Primarily make use of facial recognition to grant access. c) Should allow for the use of Biometric fingerprint recognition that can be programmed as a backup to facial recognition d) Authenticate the identity of the employees programmed and keep record of time and attendance. e) Link to a time and attendance system that can pull accurate access control reports with date and time flagged. f) Be able to communicate with via TCP/IP or wireless broadband network as a back up g) The service provider will be expected to configure the 10 devices making use of the company sim cards to serve as a back up to TCP/IP h) Devices should be able to retain access records in the absence of a network connection and update to the network when available i) Have 12month manufacturer warranty 3. Service provider must supply a software that: a) can synchronize to all 10 biometric devices into one reporting platform b) Can be installed on the company server and be accessed from a client PCs c) Client software should allow for registration of 3 users to access the platform d) Should have the capability to automate reports and have them emailed e) Is able to calculate working hours and provide a report in this regard 3 f) Allows for manual editing on the system reports by system administrators g) Has the potential to be modified in future to include remote time and attendance recording for people working from a remote location. 4. The service provider should provide device maintenance and software support for a period of 6 months. 5. The service provider should assist with user enrollments which can take up to 5 working days. 6. The service provider should provide: a) Software training for the software on client PCs and operating the devices installed. b) Training on enrolling and granting access to employees. c) An electronic training manual. Below are required: State Security Agency of South Africa certificate. Provide proof of similar work done in the Past with 2 signed reference letters with contactable references.