Narrow your search
By suburb: Vorna Valley
Other gate motor repairs requests on Kandua
<
The work involves also fixing the gate surrounds - paving, concrete - to ensure proper functioning of the gate
in Midrand, Johannesburg
Centsys D5 gate motor. The motor beeps when gate is moving. The gate closes but then opens again (it doesn’t stay closed)
in Carlswald, Midrand
Gate opens and stops at different places. Does not open fully. Changed the battery same problem. Status light flashes 4 times on the D5. Checked for obstructions and all is clear. Not sure if the rubber seal is leaking oil. I disconnected the mains and battery and reconnected still same problem.
in Midrand, Johannesburg
The gate is not picking up the limits on the gate and the gate opens after it closes.(Centurion D10 Gate motor)
Thank you
in Midrand, Johannesburg
1)Gate track runs off toothed cog
2) Gate will open 1/2 way snd stops, but some time will stop and continue to open.
in Midrand, Johannesburg
Pressure pump is stop working suddenly, don't know the reasons, they are using on garden irrigation.
in Midrand, Johannesburg
I have a centurion SDO4 T10 garage door motor to install. Please provide cost to install
in Midrand, Johannesburg
The gate motor looks like its not charging the battery. I replaced the battery 2 days ago.
in Midrand, Johannesburg
I misplaced the knob that is used to manually open and close the gate.Now I'm looking for one to replace
in Midrand, Johannesburg
Only one of these gates work I would like to install a motor that can oparte both.
in Midrand, Johannesburg
The work involves also fixing the gate surrounds - paving, concrete - to ensure proper functioning of the gate
in Midrand, Johannesburg
Centsys D5 gate motor. The motor beeps when gate is moving. The gate closes but then opens again (it doesn’t stay closed)
in Carlswald, Midrand
Gate opens and stops at different places. Does not open fully. Changed the battery same problem. Status light flashes 4 times on the D5. Checked for obstructions and all is clear. Not sure if the rubber seal is leaking oil. I disconnected the mains and battery and reconnected still same problem.
in Midrand, Johannesburg
The gate is not picking up the limits on the gate and the gate opens after it closes.(Centurion D10 Gate motor)
Thank you
in Midrand, Johannesburg
1)Gate track runs off toothed cog
2) Gate will open 1/2 way snd stops, but some time will stop and continue to open.
in Midrand, Johannesburg
Pressure pump is stop working suddenly, don't know the reasons, they are using on garden irrigation.
in Midrand, Johannesburg
I have a centurion SDO4 T10 garage door motor to install. Please provide cost to install
in Midrand, Johannesburg
The gate motor looks like its not charging the battery. I replaced the battery 2 days ago.
in Midrand, Johannesburg
I misplaced the knob that is used to manually open and close the gate.Now I'm looking for one to replace
in Midrand, Johannesburg
Only one of these gates work I would like to install a motor that can oparte both.
in Midrand, Johannesburg
The work involves also fixing the gate surrounds - paving, concrete - to ensure proper functioning of the gate
in Midrand, Johannesburg
Centsys D5 gate motor. The motor beeps when gate is moving. The gate closes but then opens again (it doesn’t stay closed)
in Carlswald, Midrand
Gate opens and stops at different places. Does not open fully. Changed the battery same problem. Status light flashes 4 times on the D5. Checked for obstructions and all is clear. Not sure if the rubber seal is leaking oil. I disconnected the mains and battery and reconnected still same problem.
in Midrand, Johannesburg
>
