Narrow your search
By suburb: Vorna Valley
Other shelving requests on Kandua
<
Cabinet with hidden fold down desk. This will be used as a hobby workbench, so I need a workstation as well as storage for tools, paints, parts etc. Space is limited so this setup is more efficient - the desk will be hidden when not in use. Must be durable. Preferably in a dark wood colour so I don’t have to worry about it getting too dirty. Not sure about the dimensions as yet but there should be enough space to work comfortably and keep things in front of and next to me.
in Lone Hill, Sandton
I have granite that I need cut and installed for a small kitchen. Sink cut-out is also required.
in Edenburg, Sandton
Chest of drawers with the following dimensions
900mm high
1500mm wide
650mm deep
See attached picture for the required design
in Sandton, Johannesburg
To make a simple chest with two upper drawers and bottom section two doors like that of a cupboard, Height - 1.2m x Length 70com x Width 60cm
in Midrand, Johannesburg
L shaped LHS couch. Will specify dimensions based on a call out. Just looking for ideas and if can be done
in Carlswald AH, Midrand
I’d like an estimate quote for now. Therefore dimensions are approximate values. I’d like a cabinet that’s 185cm high and 120cm wide with two shelves at the top, two drawers at the bottom and a pull out table above the first draw. I’m not fussy with material - as long as it’s durable.
in Sunninghill, Sandton
I'm looking for a skilled marble fabricator to build a small marble countertop for a custom made trolley.
The pro must be skilled in glueing marble together for drop front and mitered edges.
in Sunninghill, Sandton
I would like a custom cabinet/cupboard made. It would not require shelves. Height approximately 140cm high by 40cm wide by 45cm deep. Melamine in white is my preferred finish/wood. I do require a door on the front, but no door handle is needed...
in Sunninghill, Sandton
I have a storage cabinet in the garage that needs maintenance and fixing.
in Lone Hill, Sandton
rough dimensions:
L-shape bar counter
1.7m short side
2.1m long side
standard bar counter width
to be built on top of brick frame with built in cupboards
in Lone Hill, Sandton
Cabinet with hidden fold down desk. This will be used as a hobby workbench, so I need a workstation as well as storage for tools, paints, parts etc. Space is limited so this setup is more efficient - the desk will be hidden when not in use. Must be durable. Preferably in a dark wood colour so I don’t have to worry about it getting too dirty. Not sure about the dimensions as yet but there should be enough space to work comfortably and keep things in front of and next to me.
in Lone Hill, Sandton
I have granite that I need cut and installed for a small kitchen. Sink cut-out is also required.
in Edenburg, Sandton
Chest of drawers with the following dimensions
900mm high
1500mm wide
650mm deep
See attached picture for the required design
in Sandton, Johannesburg
To make a simple chest with two upper drawers and bottom section two doors like that of a cupboard, Height - 1.2m x Length 70com x Width 60cm
in Midrand, Johannesburg
L shaped LHS couch. Will specify dimensions based on a call out. Just looking for ideas and if can be done
in Carlswald AH, Midrand
I’d like an estimate quote for now. Therefore dimensions are approximate values. I’d like a cabinet that’s 185cm high and 120cm wide with two shelves at the top, two drawers at the bottom and a pull out table above the first draw. I’m not fussy with material - as long as it’s durable.
in Sunninghill, Sandton
I'm looking for a skilled marble fabricator to build a small marble countertop for a custom made trolley.
The pro must be skilled in glueing marble together for drop front and mitered edges.
in Sunninghill, Sandton
I would like a custom cabinet/cupboard made. It would not require shelves. Height approximately 140cm high by 40cm wide by 45cm deep. Melamine in white is my preferred finish/wood. I do require a door on the front, but no door handle is needed...
in Sunninghill, Sandton
I have a storage cabinet in the garage that needs maintenance and fixing.
in Lone Hill, Sandton
rough dimensions:
L-shape bar counter
1.7m short side
2.1m long side
standard bar counter width
to be built on top of brick frame with built in cupboards
in Lone Hill, Sandton
Cabinet with hidden fold down desk. This will be used as a hobby workbench, so I need a workstation as well as storage for tools, paints, parts etc. Space is limited so this setup is more efficient - the desk will be hidden when not in use. Must be durable. Preferably in a dark wood colour so I don’t have to worry about it getting too dirty. Not sure about the dimensions as yet but there should be enough space to work comfortably and keep things in front of and next to me.
in Lone Hill, Sandton
I have granite that I need cut and installed for a small kitchen. Sink cut-out is also required.
in Edenburg, Sandton
Chest of drawers with the following dimensions
900mm high
1500mm wide
650mm deep
See attached picture for the required design
in Sandton, Johannesburg
>
