The contractor will have to remove old fibre glass shell and build concrete pool 3 x4 and depth of 1.4m. I would like for the pool to be fibr5e glass and not pool crete

Hi there, I need to redo marblite, fix the outlet of the pool and fix the pool pump.

I am buying a brand new house for a staff member. They have excellent access to install a pool of 7 metres x 4 metres wide with insert steps and a heat pump. Fiberglass or Vinal

Our pool needs urgent attention. The pump is sucking in air somewhere between the weir and the pump itself. Might be linked to the water level which drops quickly when the pool is filled? When is the earliest date you can schedule a visit to see if the repairs are something you can attend to? Also, the paving/tiling around the weir needs to be re done. Our house is located at De Werf Estate in the Hemel en Aarde Valley

When I switch the pump on the water level drops slowly. Also sucking air as some bubbles are pushed back into the pool. Bubbles already appear on the filter box at the pump.

Approx 4m by 6m fibreglass in-ground pool. Expanding crack in lower corner at deep end of pool. High water table at present so cannot drain pool. Using Sikasil pool sealant for temporary repair.

Think that the pump need to be replace, nee light in pool required as well as cleaning