I need a half inch galvanized T Piece installed (with valves either side) into the existing half inch galvanized mains water pipe coming into my house, so that I can connect to a JoJo water tank. I will supply materials if you tell me what to get. I would like a price indication please.

Kitchen was done and drainage pipes were removed from two sinks. They need to be reinstalled and installation of a reverse osmosis pump set.

1) Install new pipe for appliance connection. Dig/trench about 30 metres, drill through wall, install new pipe, and stop cock. 2) Install outside concrete double sink. Drainage already in place. Taps need to be extended through wall (about 1 metre from current position). Sink has concrete feet but will need to be securely fastened to wall as well (it probably weighs around 70kg or more).

I need a quote to replace the hot and cold galvanized pipes. One of them was clamped temporarily after a leak.

Morning I am renovating and need to move existing freestanding bath mixer, new plumbing for his/hers sinks etc

Someone prior installed a pressure regulator or something in the roof that restricts the water pressure to a Junior Flushmaster toilet system x 2 which then effects the ability for them to flush properly. We have changed the valves in the flushmaster but this does not make a difference to the low volume of water used to flush.

I live in a complex of flats. The other flats have got water. After City Council worked on pipes outside the complex, the others' water was restored but not mine. Main for our 3 flats is open.