Connect

with

fast,

affordable

and

vetted

Plumbers in Cape Town

for

all

your

Washing machine installation

needs

This depends on a few things. Those are called transit bolts or shipping bolts. They are installed by the manufacturer to keep the internal drum from moving around and getting damaged during transportation. This is worth noting for Cape Town homeowners. They must be removed before you use the machine for the first time. Failure to do so will cause severe vibration and can permanently damage your appliance.

The most obvious sign is excessive noise and vibration during the spin cycle. If the machine rocks or shakes violently, it's likely not level. You can check this by placing a spirit level on top of the machine (check front-to-back and side-to-side). You can also try to rock the machine gently with your hands; it should feel solid and not wobble.

However, the taps must be in good condition and able to shut off completely. No, most machines use standard 3/4 inch taps common in SA homes. A plumber can easily replace old or leaking taps during the installation.

You can tell if your washing machine is draining properly by observing the water level during the drain cycle and checking if clothes are spun dry at the end of the wash. If water remains in the drum, clothes are still soaking wet, or the machine shows a drainage error code, it's likely not draining correctly.

Just be aware the cost may be slightly higher as it involves fitting the machine into cabinetry and attaching a cupboard door, which is more time-consuming than a freestanding model. Yes, absolutely.