Gate motor fault finding & general repair Cape Town

Continuous or patterned beeping is the motor's fault code. Common causes are a low or failing backup battery, a broken or misaligned safety beam, a jammed gate or a motor that has hit its overload limit. Most motors flash a light in a pattern that a pro can read to pinpoint the fault quickly.

This is usually the collision or obstruction sensor doing its job. The gate is meeting resistance from a bent track, a stone in the rail, worn wheels, a sagging gate or a stiff hinge, so the motor backs off. Sometimes the sensitivity is simply set too high. A pro will check the mechanical run of the gate before adjusting the motor.

Not necessarily. Intermittent remote range is often a flat remote battery, a receiver antenna that has come loose or interference from nearby equipment. If the wall button works but the remote does not, the receiver or remote is the likely culprit rather than the motor.

Common repairs such as a new battery, gear, limit switch, receiver or control board are usually well below the cost of a new motor. If the motor is very old, parts are no longer available or several components have failed together, replacement can make more sense. A good pro will tell you which situation you are in.

Here's what you need to know. Often, yes. Many faults are fixed on the first visit because pros carry common parts such as batteries, remotes, beams and gears. Jobs that need a specific control board or a gear kit for an older model may require a second visit once the part is sourced.