Paintwork (m2-square meter ,m-meter) Rate per quantity Total rate - - ON PLASTERED SURFACES H2 - - - Prepare and apply one undercoat and paint with three coats Dulux Trade Weathershield paint on: H3 - Exterior walls. -493m2 - Prepare and apply one undercoat and paint with two coats premium quality pure acrylic PVA on: H2 - Interior walls. -1537m2 - ON PLASTER BOARD - One coat bonding liquid and one coat interior quality PVA emulsion paint H3 - On ceilings and cornices -1369m2 - FIBRE-CEMENT SURFACES WITH H2 - - - Two coats pure acrylic paint on H3 - - - Ceilings -27m2 - Barge and fascia boards -49m2 - ON WOOD H2 - - - Prepare and apply one coat wood primer, one undercoat and two coats superior quality eggshell enamel on: H3 - - - General surfaces of doors. -21m2 - Three coats polyurethane suede varnish on H3 - - - Skirtings, rails, etc not exceeding 300mm girth -25m - Doors -58m2 - ON METAL H2 - - - Touch up manufacturers priming coat, apply one coat undercoat and finish with two coats superior quality enamel on: H3 - - - Pressed steel door frame.- 22m2 - Exterior gates, grilles, burglar screens, balustrades, etc. (both sides measured over the full flat area). -30m2 - Rainwater downpipes not exceeding 300mm girth -4483m - Eaves gutters not exceeding 300mm girth -188m - Spot priming bare metal surfaces with Dulux galvanised primer and applying one undercoat and two coats Dulux Roofguard paint on H3 - - - On profiled roof sheeting ---3570m2 - ON STEEL H2 - - - Clean down, prepare and apply one coat Dulux Supergrip primer and two coats Dulux Pearlglo paint on H3 - - - On columns, beams and posts 1524m2 - On purlins etc ---988m2 - On box gutters etc ---927m2 Total rands

Triming the rooms interior ceilings (cornice and stripes) and adjusting and painting doors.