I need a three phase power outlet that used to connect to my old stove to be converted into a single phase supply for a new stove.

It's a small bathroom in the basement and I need an expert in extractor fans. Thanks

Hi, ideally today or tomorrow morning I need an electrician to come and mark in my kitchen where the isolater needs to be. My current electrician never turned up and I habe workers tomorrow who need that info. Apart from this I need to get this done : Electrical tasks: Kitchen: - Take wires to new isolator point by the stove/oven. (determine if that is legal that distance). - Shift plug point closer to main box on back wall. - Install floating plugs for LED lights and Fridge. - Make all plug boxes ready for covers to be put in at the end. (covers to go over stone). - Keep wiring for plug in bathroom for the washing machine (currently it leads to old washing machine by the window, it a black cable, this needs to go through the wall into the bathroom). - Clean up and remove ALL unneeded cables (esp those running to outside for hanginf lights, left of the kitchen. Bathroom: - Install new plug point for washing machine under geyser. 2nd Bedroom: Nothing Main Bedroom: - Assess installing a plug to desk position (possibly run cable on the outside of the building). - install plug box for new plug position on the right hand side of the room. Lounge: - No changes Outside: - Test pool pump electrics, determine cause for pump issue. - Test outside plug (it leads from the left plug point in the lounge, to an outside plug, the cover is missing. (this can be used for new lighting on the deck at some point). - Test outside lights (lights by the braai area, source is a plug point in lounge by the wifi).

Yes it is not working. It needs to be rehanged in concrete and it has two dimmer switches currently. It did work for a short while and then it stopped. I got an electrician in without papers and he made a mess so I want it redone. The house is fairly recently rewired ( 3 years ago. So it either the power it draws or the two separate light switches with dimmers that is causing the problem. I enclosed the photos

Control box for geyser seems to be the problem as no electricity running to geyser.

looking at replacing some wall mounted light on the staircase and the all the old switch's in the house

Remove 12-way Distribution Box; Install 20-way Distribution Box; Wire the Circuit Breakers in 20-way DB; Test the operation of the new installation; Issue Certificate of Compliance;

Replace 2 plates om stove, 6inch and 8 inch solid plates will be supplied.

I require oven/hob to be wired into mains, geyser timer installed and two living room lights to be installed (old light units to be removed)

strange system, of course there is more than just switches: 1) couple of more outlets (EURO and SA and USB), 2)installing some light fixtures, 3)installing some LED strips and 4)checking the overall elactricity and 5)a COC.

I need a three phase power outlet that used to connect to my old stove to be converted into a single phase supply for a new stove.

It's a small bathroom in the basement and I need an expert in extractor fans. Thanks

Hi, ideally today or tomorrow morning I need an electrician to come and mark in my kitchen where the isolater needs to be. My current electrician never turned up and I habe workers tomorrow who need that info. Apart from this I need to get this done : Electrical tasks: Kitchen: - Take wires to new isolator point by the stove/oven. (determine if that is legal that distance). - Shift plug point closer to main box on back wall. - Install floating plugs for LED lights and Fridge. - Make all plug boxes ready for covers to be put in at the end. (covers to go over stone). - Keep wiring for plug in bathroom for the washing machine (currently it leads to old washing machine by the window, it a black cable, this needs to go through the wall into the bathroom). - Clean up and remove ALL unneeded cables (esp those running to outside for hanginf lights, left of the kitchen. Bathroom: - Install new plug point for washing machine under geyser. 2nd Bedroom: Nothing Main Bedroom: - Assess installing a plug to desk position (possibly run cable on the outside of the building). - install plug box for new plug position on the right hand side of the room. Lounge: - No changes Outside: - Test pool pump electrics, determine cause for pump issue. - Test outside plug (it leads from the left plug point in the lounge, to an outside plug, the cover is missing. (this can be used for new lighting on the deck at some point). - Test outside lights (lights by the braai area, source is a plug point in lounge by the wifi).